//Field and scenario devices
Figure Tower inflatable shelter
A self-deploying shelter with two built-in air motors and fabric that infrared cannot pass through. Switch it on and your arena is ready in minutes, indoors or outdoors.
Ready in 3 steps
-
Switch on
Turn on the aerofigure: that is all you need indoors.
-
Fasten
Secure the anchor points to lock it in place.
-
Load
Add ballast for stability outdoors.
Why it is different
-
Self-deploying
Two built-in air motors and a rechargeable power bank: no wires, pumps or manual inflation.
-
Blocks infrared
High-density proprietary fabric that low-power indoor and high-power outdoor infrared cannot pass through, even at 100% power.
-
Weatherproof
Withstands wind and rain, holds its shape through 24 hours of play and resists −50 to +110 °C.
-
Your colours
Red, phygital or made to order, for branded arenas and events.
Key specs
| Height | 180 cm (5.9 ft) |
|---|---|
| Length | 140 cm (4.6 ft) |
| Width | 140 cm (4.6 ft) |
| Material | Proprietary synthetic blend fabric |
| Air motors | 2, impact-resistant ABS plastic |
| Setup time | 5–10 minutes |
| Continuous operation | Up to 24 hours |
| Power | Power bank (sold separately) |
| Included | Carry bag |
Questions
Can it be used indoors and outdoors?
Yes. Indoors, just switch it on; outdoors, fasten the anchor points and add ballast.
Can shots go through the fabric?
No: the fabric stops low-power infrared indoors and high-power infrared outdoors.
